Sinergit Ltd.

itenfrdeptrues
You are here: Sinergit Products Reselgit compact
26 January 2025

More that produce semi-finished products, such as sheets, rods, sleeves etc., The Sinergit is available for the realization of finished pieces, with or without metal elements incorporated, that for the particular technologies employed, also adaptable to small series, should cost less of the pieces obtained by machining from semi-finished and still offer superior performance which in itself is already a lower cost.

AVERAGE CURRENT PRODUCTION VALUES - RESELGIT® COMPACT
Shore A hardness degrees ASTM D-2240  65  80 90 -
Shore D hardness degrees ASTM D-2240 - - - 50
Specific gravity gr / cm3  1,06 1,06  1,06 1,06
Breaking load in traction daN / cm2 ASTM D-412  200 200 300 450
Elongation at break% ASTM D-412  420  750 430 330
resilience% ASTM D-945  70 80 72 42
Resistance to tearing daN / cm ASTM D-470  2,6 12,3 12,9 23
Abrasion resistance mm3 RUBBER = 100  75 45 55 50
tensile modulus to 100% elongation daN / cm2 ASTM D-412  -  - - 150
Tensile modulus at 300% elongation daN / cm2 ASTM D-412  45 40 140  -

EXAMPLES OF PRODUCTS MANUFACTURED IN COMPACT RESELGIT®

Below are some examples of finished articles produced on request:

  • BUSH AND COUPLINGS:
    High load capacity, significant vibration damping, compensation for misalignment, oil resistance and aging.
  • SEALS:
    Resistance to mineral oils, petrol, abrasion and wear, to high pressures without the risk of extrusion.
  • ROLLERS AND MUGS FOR TRANSPORT:
    High load capacity and durability. The rollers for special applications can be constructed with a range of hardness progressively variable from the center to the end. The cups are indicated especially for abrasive substances, in fact resistant to wear even in the presence of moisture, they are lightweight, do not pollute and can work at -20 ° C without brittle.